Decision dossierEvidence reviewed
door-type dishwasher

Hobart AM15 Parts & Repair Costs: Used-Buy Risk Guide

Hobart AM15: used $3,000–$15,000, OEM part prices, the documented failures that actually cost money, and what to inspect before you buy used.

Status: published
Used range$3,000–$15,000
Recallnone found
Known risks2
Sources7
Verified2026-09-05
Buy-Risk Verdict
Inspect before buying · moderate confidence
Short answer: $3,000–$15,000 observed used. Biggest documented cost risk: Cross. Buy only after inspection. Used examples run $3,000 to $15,000. Basis: webstaurantstore.com.

Last verified against the primary source on Sep 5, 2026.

Decision status
inspect

$3,000–$15,000 observed used. Biggest documented cost risk: Cross. Buy only after inspection.

Confidence 56%
Market context
Not yet verified

7 observed comparables

As of Aug 19, 2026
Repair Risk Matrix

What can make the cheap machine expensive?

Parts Town's own AM15 parts catalogmedium

Parts Town's own AM15 parts catalog (613 line items -- see Repair…

Cost not yet verified

Common questions

How much does a used Hobart AM15 cost?

Observed listings range roughly $3,000 to $15,000 depending on age, condition, and configuration (as of 2026-08-19).

Key parts and observed prices

PartPart #Observed priceAs of
Rinse Arm Assembly00-893093-00001$290.702026-09-05
Temperature Control Kit00-294618$91.432026-09-05
High Limit Protector00-271123$188.982026-09-05

Prices are point-in-time observations from the linked seller pages, not quotes. Availability and pricing change.

What fails on the Hobart AM15, and the parts to know

What to test before you buy

  • Won't run: confirm the door fully closes and the interlock clicks — the door switch (00-473109-00004) is a top suspect.
  • Overfills: watch a fill cycle; if water keeps flowing with the machine off, the fill solenoid is leaking.
  • Poor wash or spotting: check the pump screen (00-893063) and confirm the high-temp final rinse reaches roughly 180°F.
  • Ignore digital error codes (E0/E2/DR1, etc.) — those are newer LX-series controls; the AM15 is electromechanical and will not show them.

Commonly replaced parts (OEM part numbers)

  • Door switch / interlock — 00-473109-00004
  • Membrane keypad — 00-893113 (an expensive control part; factor into a used buy)
  • Pump screen — 00-893063 (cheap, high-wear; clogs cause poor wash)
  • Fill/rinse solenoid valve — 00-893100-00001 (coil alone = 00-892132)
  • Booster element — 00-936546 family (voltage-specific; a 13KW booster = 00-749554-00001)
  • Wash-tank element — 00-893120 family

Before you order a part

  • Heater and pump SKUs are heavily voltage- and phase-specific (200/208/240/380-480V, single- vs three-phase) — match the data plate, do not order by model name.
  • Several element families exist (booster vs 13KW booster vs wash-tank) — the wrong one is a common mis-order.

Part numbers and failure points are cross-referenced from the OEM-authorized Parts Town catalog (parts diagram); confirm the exact part against your unit's data/serial tag before ordering, and get a current price quote.

From the research record

  • FAILURES: - Directionally relevant (NOT AM15-model-specific — sourced from an official Hobart Service UK troubleshooting video for commercial dishwashers generally, verbatim auto-captions, direct-source mined not searched): standard checks include wash arms/strainer clear of debris and correctly oriented, and door/door seals clean and intact — named explicit
  • REPAIR: - OEM parts (Parts Town, Hobart AM15 catalog, 613 parts listed): - Float Switch and Probe Assembly (Low Water): $407.42 - Rinse Arm Assembly: $290.70 - Solenoid Valve (1/2", 120V): $322.12 - Contactor (110-120V, 40A, 3 Pole): $253.91 - Water Hose (SS Braided, 1/2" x 81"): $146.37 - Bearing Assembly: $137.22 - Probe Assembly (Rinse): $100.30 - Tempe
  • VIDEO (00:00:55 https://www.youtube.com/watch?v=Yb90V7bGvxw): "remove any debris replace wash arms and strainer make sure"
  • VIDEO (00:00:57 https://www.youtube.com/watch?v=Yb90V7bGvxw): "replace wash arms and strainer make sure"
  • VIDEO (00:00:57 https://www.youtube.com/watch?v=Yb90V7bGvxw): "replace wash arms and strainer make sure these are the right way round check your"
  • REPAIR PART (2026-09-05): Rinse Arm Assembly (00-893093-00001): $290.70 https://www.partstown.com/hobart/hob00-893093-00001
  • REPAIR PART (2026-09-05): Temperature Control Kit (00-294618): $91.43 https://www.partstown.com/hobart/hob00-294618
  • REPAIR PART (2026-09-05): High Limit Protector (00-271123): $188.98 https://www.partstown.com/hobart/hob00-271123

Sources

  1. webstaurantstore.comretailer · research-cited · accessed 2026-08-19
  2. youtube.comweb · research-cited · accessed 2026-08-19
  3. youtube.comweb · research-cited · accessed 2026-08-19
  4. youtube.comweb · research-cited · accessed 2026-08-19
  5. partstown.comparts-retailer · research-cited · accessed 2026-08-19
  6. nordiskclean.comweb · research-cited · accessed 2026-08-19
  7. partstown.com part listings (prices observed 2026-09-05)parts-retailer · verified · accessed 2026-09-05
Spot an error? Challenge this record

Found an out-of-date code section, a wrong verdict, or a better primary source? Tell us. Corrections that check out are applied, with the change shown in history. That is our standing policy.

Related records

More in Hobart

All Hobart records →