Decision dossierEvidence reviewed
prep equipment

Hobart N50: Parts Prices, Common Failures & Used-Buy Check

Hobart N50: real repair-part prices, documented failure points from owner reviews, and used pricing where verified.

Status: published
Used rangeresearching
Recallnone found
Known risks1
Sources3
Verified2026-09-07
Decision status
insufficient-data

Hobart N50: documented failure points, real repair-part prices for buyers and owners.

Confidence 0%
Market context
Not yet verified

Comparable set not yet verified

As of Not yet verified
Repair Risk Matrix

What can make the cheap machine expensive?

Planetary / attachment hub sealslow

Parts Town's Hobart mixer troubleshooting guide identifies leaking grease from the planetary (needs spacer o-ring replacement) or attachment hub (needs quad ring replacement) as the common seal-wear failure across the Hobart planetary/countertop mixer line the N50 belongs to.

Cost not yet verified

Common questions

What fails on the Hobart N50?

The most cited concerns in our evidence record: Planetary / attachment hub seals. See the risk breakdown above for details and sources.

Key parts and observed prices

PartPart #Observed priceAs of
D Wire Whip, Stainless Steel, 5 Quart, N5000-295580$153.742026-09-07
Tumbler Yoke and Shifter Pin Assembly, N5000-107342$195.212026-09-07

Prices are point-in-time observations from the linked seller pages, not quotes. Availability and pricing change.

From the research record

  • REPAIR PART (2026-09-07): D Wire Whip, Stainless Steel, 5 Quart, N50 (00-295580): $153.74 https://www.partstown.com/hobart/hob00-295580
  • REPAIR PART (2026-09-07): Tumbler Yoke and Shifter Pin Assembly, N50 (00-107342): $195.21 https://www.partstown.com/hobart/hob00-107342
  • RISK (2026-09-07): Planetary / attachment hub seals [low]: Parts Town's Hobart mixer troubleshooting guide identifies leaking grease from the planetary (needs spacer o-ring replacement) or attachment hub (needs quad ring replacement) as the common seal-wear failure across the Hobart planetary/countertop mixer line the N50 belongs to. "If your Hobart mixer is leaking grease, it could indicate that there's an issue with the seals." https://www.partstown.com/cm/resource-center/guides/gd1/hobart-mixer-troubleshooting

Sources

  1. partstown.com (owner review / troubleshooting)owner-review · verified · accessed 2026-09-07
  2. partstown.com parts priceparts-retailer · verified · accessed 2026-09-07
  3. partstown.com parts priceparts-retailer · verified · accessed 2026-09-07
Related records

More in Hobart

All Hobart records →