Last verified against the primary source on Sep 14, 2026.
No verified used-market price found (parts confirmed: $52.60 OEM drive belt); OEM troubleshooting guide flags dull/chipped knife and worn knife-to-table gap as the top cause of ragged cuts, and motor overheat as a stop-running fault — inspect blade edge, sharpener stones, slicer-table gap, and motor reset behavior before buying.
Confidence 60%Comparable set not yet verified
As of Not yet verifiedWhat can make the cheap machine expensive?
OEM troubleshooting table: "Ragged cuts-poor yield. 1. Dull knife 2. Chipped knife 3. Knife-slicer table gap too wide 4. Knife too small." Solution: "Sharpen knife-make sure knife and stones are clean... Sharpen or have new knife installed... Call for service to adjust slicer table... Have new knife installed."
Cost not yet verifiedOEM troubleshooting table: "Slicer stops running. Cause: Motor overheated." Solution: "Wait 10-15 minutes for slicer to cool down. Push the reset button, then start the slicer."
Cost not yet verifiedOEM troubleshooting table: "Metal rubbing knife. 1. Knife cover 2. Food chute 3. End weight 4. Slicer table." Solution: "Tighten knife cover release knob... Tighten or adjust food chute knob... Have defective end weight replaced... Call for service to adjust slicer table."
Cost not yet verifiedCommon questions
What fails on the Globe G12?
The most cited concerns in our evidence record: Knife edge / knife-to-table gap, Drive motor / motor reset button, Knife cover / food chute / end weight / slicer table alignment. See the risk breakdown above for details and sources.
Key parts and observed prices
| Part | Part # | Observed price | As of |
|---|---|---|---|
| Drive Belt, G12/G12A | Parts Town #GLOM024, Mfr #M024 | $52.60 | 2026-09-14 |
Prices are point-in-time observations from the linked seller pages, not quotes. Availability and pricing change.
Live listings on eBay
Live listings via the eBay Browse API. Links are affiliate-tracked and KitchenRisk may earn a commission on qualifying purchases, at no cost to you.
From the research record
- REPAIR PART (2026-09-14): Drive Belt, G12/G12A (Parts Town #GLOM024, Mfr #M024): $52.60 https://www.partstown.com/globe/glom024
Sources
- partstown.commanual · verified-primary · accessed 2026-09-14
- partstown.comweb · verified-primary · accessed 2026-09-14
- partstown.comweb · verified-primary · accessed 2026-09-14
Spot an error? Challenge this record
Found an out-of-date code section, a wrong verdict, or a better primary source? Tell us. Corrections that check out are applied, with the change shown in history — that is our standing policy.